Live in a soft water system region and get leaner energy invoices

There are several products that serve as auxiliary items for your central heating system so that it functions normally, and then there are those that work independently to give you the service you want. Irregardless of which you choose, you should take proper care of your central heating system, only then can it perform efficiently. Our Government and environmental activists have been telling us to switch off lights, turn televisions completely off instead of leaving them on standby, and lower the temperature of our washing machines as well us the thermostats of our rooms. These environmentally conscious steps not only save the greenery on our planet, but also save the pound notes in our wallet. So how to make your central heating system run efficiently and reduce carbon dioxide? Your gas central heating’s efficacy decreases when limescale deposits and gunk accumulate in it.

Whether your water is hard or soft can play a crucial role in the life of your central heating system and water treatment can help here – to extend the healthy working of your system with products such as Fernox.

The term ‘water treatment’ is one that is used to describe various methods of taking care of your system. A wide assortment of water treatment products is easily available like gunk remover, scale reducer, anti-freeze, magnetic scale fighter, noise reducer, electronic scale inhibitor, and the like.

Your location in the UK caninfluence the extent of your water’s hardness or softness. If you spot limescale formation inside your kettle or bath taps, there is probably hard water running in your taps. Limescale deposits inside boiler parts, pipework and radiators increases energy consumption and can lead to banging and bumping in the pipework. A tiny layer of scale inside the cylinder of your hot water can augment your fuel cost by up to forty percent. Limescale is simply calcium deposits in your system. Soft water area residents should not worry too much, but it doesn’t hurt to ask for help if you are not so sure.

Most water treatments act by altering the molecular structure of the water and the particles therein and changing the way it behaves. One way of modification is to convert a structure completely to another, another is to take out the mischievous component, and yet another way is to prevent the structure from becoming solid, thus leaving its normal process unrealized.

Chemical test kits are available that allow you to check the probability and speed of corrosion by gauging the levels of ph, chloride, iron and copper.

To begin with, you should make certain that your system has been assembled by a qualified individual, for example it’s important to have the simple knowledge that connecting aluminum and copper or brass triggers a corrosive reaction because that’s what happens when different metals are joined. The gas connections should be made only by a trades person, who is Gas Safe registered (with CORGI).

Always plan before getting the new system installed; for instance, you should know what water treatment method should be used. If you are upgrading your current system, you must cleanse your whole system before any water treatment chemicals are added.

Products added to the mains supply can soften hard water and improve the quality of water for domestic use, but they do not prevent or remedy deterioration of the central heating system. They do not alter the efficiency of your system, they only allow soaps and detergents to produce more lather when washing clothes.

You basically need to prevent your system from three things, limescale deposits, biological growth and corrosion.

Corrosion will begin as soon as the tank is filled with water. The residue from corrosive action causes clogging of the water flow and reduces uniform heat transfer through the radiators. Pinholes can appear in the radiators and if untreated the boiler can start making noises.

Hard water contains magnesium and calcium and these minerals deposit as limescale in the system. The deposits thicken when the water is heated, this leads to formation of a hard crust over a time period which eventually blocks pipes etc. This can be another cause of the boiler making strange noises.

Biological growth is another thing that should be avoided at all costs. Minute organisms can enter through the vents and storage tanks of the boiler. The biological growth advances rapidly in the form of a slimy lining. This sludge stagnates in the plumbing and slows down the flow of hot water.

You can learn more about these problems on the internet. Take out time to go through a few pages of free advice. I would start with the manufacturers themselves. Some well known manufacturers and their popular products are listed in this site, such as Sentinel or Fernox. Blogs are another great source of free advice and information or contact a supplier with any queries that you may have.

Good luck with your water treatment heres to energy cost-efficient central heating and hot water with lower household bills of course.

Posted in Boilers